• Stranded copper wire, bare, tinned, silver
• Make-up fine wire stranded to
  DIN VDE 0295 cl.5, BS 6360 cl.5 and
• IEC 60228 cl.5
• Core insulation FEP-HELUFLON^®

• Higher insulation resistance
• Low dielectric loss
• Not flammable
• Min. 20 kV dielectric strength
• Resistant to micro-cultures
• Do not permit any fungus-formation
• Absolute ozone resistant
• Absolute weather resistant
• Water absorption <0,01%
• Minimal water vapour permeability
  (approx. 0,18 mgr/cm² in 24 hours)
• Self-extinguishing and flame retardant
  acc. to DIN VDE 0482 part 265-2-1/
  EN 50265-2-1/ IEC 60332-1 (equivalent
  DIN VDE 0472 part 804 test method B)
• The materials used during manufacturing
  are cadmium-free, contain no silicone
  and are free from substances harmful
  to the wetting properties of lacquers

• AWG sizes are approximate equivalent values. The actual cross section is in mm².
• Please complete the above part-no. for the colour required using the following table:
  1 = black, 2 = red, 3 = blue
  4 = brown, 5 = white, 6 = transparent
  7 = 2-colour, 8 = other colours

HELUFLON® cables are predominantly used for installing in control cabinets subjected to high thermal effects as well as in brickworks, heaters, kitchen fitments and measuring appliances as well as in the chemical industry. These cables are non-flammable and resistant to acids, alkalis, solvents, oil and petrol.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.