• Bare copper conductor to DIN VDE 0295
  and IEC 60228, BS 6360
  single wire, solid: class 1
  multi stranded wires: class 2
  fine wires: class 5
• Rubber core insulation, compound type
  EI3 (EVA) to DIN VDE 0207-363-1/
  DIN EN 50363-1
• Separating layer over bare conductor (for tinned conductor is optional)
• Core identification to DIN VDE 0293
• Standard colour black

• Single core colours green and yellow can only be applied where the safety regulations are allowed
• The identification for the lighting chain cable is green permitted

• AWG sizes are approximate equivalent values. The actual cross section is in mm².
• Please quote the individual part-no. in your order with the codes for core colours of the key-positions.
  00 = green
  01 = black
  02 = blue
  03 = brown
  04 = grey
  05 = orange
  06 = pink
  07 = turquoise
  08 = white
  09 = violet
  10 = yellow
  11 = green-yellow

For inside wiring of switch boards and distributors as well as of operating parts such as in or on lights, for the connection of electric heaters with a nominal voltage up to 1000 V alternating voltage or up to 750 V direct voltage against ground. The cables are all allowed for laying in tubes, on and under the plaster.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.